The coke oven gas was cleaned in a process plant that looked like a small refinery. The tars, oils and other chemicals such as toluene and napthalene were removed and recovered and sold. The cleaned gas was then returned to the coke ovens to fire them.
This is taken on top of the battery of ovens. There was a hopper car that rode on rails at this level, which dumped the coal into the ovens below thru manhole covers. On the left are the hot rails for the car on their supports. On the right are the gass offtake pipes which collected the coal gasses as the coal was coked, and the gasses were drawn to a process plant where the various volatiles were removed (toluenes, napthalenes, oils, etc., and the scrubbed gas was then used to fire the ovens to make more coke.
Not sure wht it is, but looks like picture is taken looking at a corner of a square shaped bucket, so we only see two of the four sides. There is probably another lifting lug similar to the one on the left side around the corner on the opposite side out of view on the right. The photo taken from this angle really makes it interesting.
The quench tower is basically a chimney with an array of water pipes and spray nozzles just above the tunnel opening. The quench car had 2000F coke in it hot from the ovens. and the car brought it under this structure where water sprays cooled it down. There would be a white plume of water vapor like a cloud coming out of the chimney, rising into the sky like a great cumulus cloud.
Its a peaceful shot, and if they day outside was sunny and the sky was blue it would have been a beautiful view. But to be a prisoner of a patient looking out from the fencing longing to be on the other side, would have been heartbreaking.
I came up with this idea where the kids from the Disneyland Fun Sing Along video rode the carousel at Rocky Point. It does sound a bit weird, but I made it take place in 1990. What do you think of this idea? Do you like it???
who was the first persn that made an elevator ?And when was it made ?Why was it built ?what did they think of making that idea ? And who thought of that idea ? And what pulley system was it made out of?Where was it made ? Why was it made? How did it make it ?